The 2400 - 2500 inductive proximity switch has large detection distance and is designed for use in harsh industrial environments.

STS introduce the ATM/F/Ex intrinsically safe flange pressure transmitter. This pressure transmitter is designed for use in hazardous areas.

The DC425 is an absolute analog multi-turn rotary shaft encoder, offering an analog current or analog voltage output over single or multiple turns.

West introduce the West 2300 1/32 DIN temperature controller. The 2300 temperature controller has been designed to be WEST’s smallest control offering without sacrificing functionality.

ASM introduce the WS12EX rugged cable extension position sensor that has a measurement range up to 3 metres.

FEAS now offer the shock and vibration resistant DC/DC converter series DCC90 for use under rough conditions.

The 3201.-vent-captor is a solid state switching and monitoring device for use in industrial air handling applications.

AMCI introduce the ANG1(E) Integrated Stepper Controller/Drive. The ANG1(E) adopts a ground breaking approach to PLC-based motion control systems.

STS introduce a new pressure transducer that is free of elastomers. For applications in which O-rings are either undesirable or impermissible, a measuring cell with a fully welded process connection is now available.

HT-20C performance begins with a 5/8" stainless steel shaft supported by a an over-sized double row sealed bearing. The rotor of the brushless resolver is built on the input shaft, minimizing component count & maximizing reliability.

Hengstler introduce the F14 Motor Feedback System. The F14 offers compact package dimensions and a pluggable pin header. A compliant tether allows easy mounting with high tolerance to motor shaft movement and 30 degrees of adjustment to align the signal outputs to the shaft position.

The PTAS2 is an industrial grade sensor that has been tested to withstand the harsh conditions which make it suited for a wide range of applications such as factory automation machines and robotics, mobile cranes, draw bridges, adjustable platforms and off-highway construction equipment.

The 6500 has a single 3 digit display which is designed for maximum visibility. The operator can easily view the actual temperature, set point and alarm value. A green LED indicates that the control is either below, above, or right on the set point.

The DL/N/Ex is appropriate for continuous monitoring of ground and surface waters. It collects measured values of various parameters such as conductivity, temperature, and pressure.

The helical flexible coupling is used for transmitting torque between two shafts while allowing for angular misalignment, parallel offset and even axial motion (of one shaft relative to the other).

The PRAS5EX uses the magnetic measurement principle to measure angles from 0-360°. The shaft version of the PRAS3EX can do a maximum of 10,000 r.p.m. and can withstand temperatures from -20°C to +40°C.

The laser-captor offers rugged design that ensures maintenance free operation and longevity, together with a dependable high performance operation, even in harsh environmental conditions.